Q: Will these J-Hooks fit on my BD-7 power rack? If not, is there any J-hooks that will fit on this model? Not a fan of the original holders.

Asked by: Jordyn - 5/11/2020
A: Thank you for your question! The RG-7 J-Hooks are only compatible with Valor Fitness rigs. For the BD-7 you can use our MB-E Short Bar Holder.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen Adon (5/12/2020)

Q: What is the diameter of the peg? I have a rig with 5/8 inch holes. Thanks!

Asked by: Bret - 4/22/2020
A: Thank you for your question! The RG-7 J-Hooks have a 1 inch diameter peg.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen Adon (4/29/2020)

Q: Will these fit on the BD-9? If not, do you make any J hooks that will fit the BD-9?

Asked by: Paul - 4/12/2020
A: Thank you for your question. Unfortunately, this are not meant to be used with the BD-9. We do not currently have any attachments that will fit the BD-9.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (4/14/2020)

Q: Will this fit the BD-18 squat stands?

Asked by: Steve - 3/27/2020
A: Thank you for your question. No, the RG-7 is solely made for use with 3” x 3” RIG’s or racks.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (3/30/2020)

Q: Will RG-7 J hooks fit the BD-41 cage?

Asked by: Nathan P. - 1/25/2020
A: Thank you for your question. The RG-7 was built for 3” x 3” frames, so it will not fit the 2.5” x 2.5” frame of the BD-41. The BD-41 includes 3 pairs of short barbell holders/J-hooks, but if you are looking for additional ones, please see our MB-G Short Bar Holder (https://www.valorfitness.com/MB-G-Short-Bar-Holder-for-BD-11-BD-41_p_199.html)
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (1/27/2020)

Q: Will these work with an ETHOS Power Rack 1.0 from Dick's Sporting Goods.

Asked by: Mike A. - 11/3/2019
A: Thank you for your question. All Valor Fitness Accessories are meant to fit Valor Fitness products. We cannot confirm or deny it will fit another rack. The RG-7 is mean specifically for the Valor Fitness RIGs. If you were to purchase this for another rack and it did not work, then return shipping would be deducted from your refund.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (11/4/2019)

Q: Hi - will these fit the BD-41 rack?

Asked by: Michael C. - 11/2/2019
A: Thank you for your question. No, these will not fit the BD-41 as they are made for a 3”x3” frame. The MB-G accessory set will serve the same purpose as the RG-7 but will fit the frame of the BD-41. (https://www.valorfitness.com/MB-G-Short-Bar-Holder-for-BD-11-BD-41_p_199.html)
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (11/4/2019)

Q: What is the maximum weight (in pounds) that the J-Hooks can withstand before failure?

Asked by: Joe C. - 10/29/2019
A: Thank you for your question./The max weight load of the RG-7 is 750 lb. This limit should not be exceeded.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (11/1/2019)

Q: Will these fit on th BD-41 rack?

Asked by: Courtney C. - 9/10/2019
A: The RG-7 was built for 3” x 3” frames, so it will not fit the 2.5” x 2.5” frame of the BD-41. The BD-41 includes 3 pairs of short barbell holders/J-hooks, but if you are looking for additional ones, please see our MB-G Short Bar Holder (https://www.valorfitness.com/MB-G-Short-Bar-Holder-for-BD-11-BD-41_p_199.html).
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Allen A. (9/11/2019)